Production Coordinator is responsible for the following activities: -

 Execution of Production Plans (Daily, Weekly and Monthly time & Action Plan):

a)       Execution of production plan from fitting to assembling line against production orders.

b)      Develop and implement time and action calendar for fitting, polishing and assembling lines.

c)       Achievement of department PRIME GOAL (i.e. Maintain quality standards, defect free products, On Time Deliveries while complying with QMS system and company rules).

Capacity Utilization and achievement of daily, weekly and monthly production targets of Electronics Department.

a)       Prepare and Implement resource utilization plan and monitor the achievements of daily, weekly and monthly production targets of assembling unit-1.

b)      Manage all relevant inputs (Manpower, Machine and Material) to ensure production outputs and on time production targets are achieved

c)       Plan, schedule and review workload to ensure production output in all relevant production assembling areas and on time delivery targets are achieved.

d)      Ensure that the assembling unit-1 has the necessary manpower, competence, skill, knowledge, machine and tools required in order to achieve production targets.

Process Control & Improvement:

a)       Evaluate the existing production process/method and suggest improvement activities based on the engineering tools and productivity theories.

b)      Evaluates all continuous improvement activities and implements plans to optimize performance and processes.

c)       Organize, implement and maintain production process flow in the assembling unit-1 as per approved Production Flow.

d)      Investigate quality & operational problems affecting product, production and reporting/ recommending solutions.

e)       Ensure that the work instructions, workmanship, QMS standards are implemented in the department.

f)       Responsible to ensure all set inspection parameters are followed as standard for every product lot.

g)      Develop methods that would help in reducing the cost through efficient work design and manufacturing techniques without compromising on the quality standards to ensure increased efficiency and quality.

h)      Coordinate with Manager Product Development in development of electronic prototypes for under development products & Procedures.

QMS Implementations:

Ensure QMS standard, protocols and documents are being implemented at all levels. (I.e. Drawings, Flow Charts, Work Instructions, Workmanship Standards and Process Procedures etc. for product manufacturing.

Quality of Product:

a)       Suggest ways and means to ensure the product under his scope conformance with design and performance specifications.

b)      Ensure that the product fabricated meets or exceeds the quality parameters.

c)       Ensure that the quality of product is being monitored at source. (In Process Q.C).

6)      Complaints Handling:

a)       He shall assist QA and other related departments in investigating the root cause of complaints under his scope for customer feedback and also suggest ways and means to improve the quality of the products and take corrective/preventive actions accordingly.

Monitor and manage production KPI’s of the Assembling Unit;

Ensure achievement of following KPI’s of the Department.

a)       % utilization of production capacity

b)      % Achievement of daily weekly and monthly production targets applicable to the production unit

c)       % reduction in the rework and rejection

d)      % reduction in overtime as compared to total production

e)       % reduction in the Production cost

f)       % of shipments delivered targets achieved.

نوکری کی تفصیلات

صنعت:
شعبہِ افعال:
کل عہدے:
1 اشاعت
نوکری کی شفٹ:
پہلا پہر
نوکری کی قسم:
نوکری کا مقام:
جنس:
کوئی ترجیح نہیں
کم از کم تعلیم:
بیچلرز
ڈگری کا عنوان:
BSc Electronics
کیریئر کی سطح:
تجربہ کار پیشہ ور
تجربہ:
2 سال - 5 سال
اس سے پہلے درخواست دیجیۓ:
جولائی ۲۲, ۲۰۲۲
تاریخِ اِشاعت:
جون ۲۱, ۲۰۲۲

Medical Devices Pvt Ltd.

تعمیراتی · 1-10 ملازمین - سیالکوٹ

Medical Devices (Pvt.) Ltd. is proudly the most sought after name in the field of Medical Diagnostic Instruments. Since its birth, the chief aim of our company has been to utilize all its energies, manpower and technology towards developing superior quality instruments, with special emphasis on them being technically precise as well as user friendly. In order to serve the interest and meet the requirement of our customers, we endeavor to the best of our abilities to improve our existing line and also introduce new products. Medical Devices is located 10 Km outside the city of Sialkot, which has been a major manufacturing center for Surgical and Medical Instruments since the independence Pakistan. We specialize in the production of anesthesia products, Laryngoscopes and Diagnostic instruments. From our base in Pakistan, We are serving people in the Medical profession in virtually every country through our well established dealers network. We are also supplying products to various original Equipment Manufacturers (OEM) in strategic parts of the globe, Who are covering a vast territory through their sales network. Medical Devices has grown from a small-scale company since its establishment in 1991 to a large scale Company. This has been achieved due to the presence of a skilled and motivated group of people who, through their utmost dedication, have helped produce premium quality products.

آپ کو کس حوالے سے برتری حاصل ہے؟

اپنے بارے میں ہماری پیشہ ورانہ رائے اور تقابلی جائزہ حاصل کیجیۓ
اپنی سی وی کو موءثر بنانے کیلئے ہماری ماہرانہ مشاورتی ٹیم سے رابطہ کریں
روزی پریمیئم کو آزمائیں

ملتی جلتی نوکریاں

Production Manager

Mux Foods, ملتان, پاکستان
جولائی ۲۵, ۲۰۲۲ شائع ہوئی

Production Supervisor

Style Styrofoam Industries, لاہور, پاکستان
جولائی ۲۲, ۲۰۲۲ شائع ہوئی

Production Manager

Forta Industries (Pvt.) Ltd, سیالکوٹ, پاکستان
اگست ۰۱, ۲۰۲۲ شائع ہوئی

Production Manager

Dawat-e-Islami Trust, کراچی, پاکستان
جولائی ۲۱, ۲۰۲۲ شائع ہوئی
تمام دیکھیں
I found a job on Rozee!