9+ years of experience in Electrical and Instrumentation field, designing, erection, installation and commissioning of large scale projects.
-Rich experience of HMI and logic designing with PLC, SCADA, wonderware Intouch HMI, Siemens, Allen Bradley, Omron, Mitsubishi.
-Siemens S7 Simatic Manager V5.5
-Siemens TIA Portal V13
-Siemens WinCC Professional V13
-Allen-Bradley PLC-5, RS-View, RS-Logix
-Mitsubishi FX2N, FX3G, FX3U suing GX Developer
-Omron PLC CX-Programmer, Omron HMI CX Designer.
-IMAL s.r.l dosing system WinSCADA.
-Siemens S7-300/400 Profinet, Profibus, DP/MPI parameterisation & configuration.
-Eurodrive, Schnieder, Hyundai, Delta, Siemens V20, Siemens G120 VFD.
-Woodward EG3200 Load sharing Module, inverters configuration and installation.
-Vast experience in instrumentation, Control valves, RTD, PID controllers, temperature modules, Analyzers, Thermocouples, sensors and actuators.
- DC, AC motors efficiency analysis.
- Energy monitoring using Klemson Analysers, GTOR gateway with webserver for energy management and saving.
-Testing, installation and troubleshooting of APFC, 11KV VCB , Alstom/Areva CDG Protection Relays, Reverse Power Protection, ABB Motor Protection Relays, Schnieder 11KV Protection Relays.
Supervised many projects erection, handling, commissioning including
-Erection and commissioning of 60TPH Boiler
-Erection and Commissioning of Rice Bran Processing Unit.
-Erection and Commissioning of Short-cycle Lamination Press. Designed complete logic for hydraulic system on Mitsubishi FX series PLC.
-Erection and commissioning of three BD egg layer control shed. Installation & configuration of controllers for each house.
-Erection and commissioning of 04 Cumberland Broiler control sheds. Installation & Configuration of EDGE controller.
-Erection and commissioning of Impregnation Paper plant.
Houser by Parker
>Joined with the task to improve process and modernization of system with PLC system.>Key responsibility of designing, commissioning and normalization of electrical, PLC & control related operations.>Efficiently managing IMAL s.r.l Dosing system and Glue kitchen implemented through SCADA, Hapco Lamination Press, Steinemann Sanding machines, Siempelkamp Hot Press and Imal PAL Group Flackers.Key Accomplishments:-Installed VFD with PID configuration for auto control of Feed conveyors to DSM, Dry Hammer Mills using the WAGO control.-Automation of 12Ton Flacker Hydraulic system and control with all functional safeties including Auto Braking system, Accident Prevention actuators, using Mitsubishi PLC and Weintek HMI.-Configuration & implementation of SCADA system using the Weintek MTV-100 server for connecting multiple PLCs including Siemens S7-300, Mitsubishi FX2N, FX3U and FX3G as clients and build a SCADA system over Ethernet with remote access on Mobile, Local WLAN using VNC Viewer and EasyAccess 2.0-Automation of Air compressor section installed in remote location to with auto start routines, schedules routines, fault routines and shutdown routines to maintain the air pressure level to mitigate the downtime.-Complete designing of automation control system for Printing machine with infeed outfeed hydraulic lifts and conveyors using FATEK PLC.-Working on installation of Siemens S7-1500 PLC with ET200SPÃƒâ€šÃ‚Â in Dryer and Chipper section and intelligent monitoring of Silo Levels, Feed speed control, Dryer inlet and outlet temperature PID control, moisture control and synching with Dosing bunkers.-Working on implementation of database server using MySQL for QCÃ‚Â and Analysis.
>Working as team leader with key responsibility of designing, commissioning and normalization of electrical & control related operations.
>Shoulder the responsibility for preventive and breakdown maintenance of HT/LT Motors, ACB/VCB, HT/LT switchgears and NGR Panel.
>Designed, upgraded the PLC control system for various process level applications. Retain 11KV system safety devices, safety instruments.
Designing of Field Panels, MCC panels with Power & Control circuit AutoCAD drawings.
-Successfully implemented load management and energy monitoring system using Klemson analysers with RS-485 modbus network of 11 stations remotely connected through GTOR gateway capable of remote webpage login over ethernet that greatly helped in power management for Energy cost reduction.
-Worked on Omron PLC CP-200H for forming line logic improvement and Omron HMI for addition of histograms & trends using CX-Developer.
-Worked on custom IMAL based glue dosing system with provision of fiber flow Kg/min, glue dosing L/min with calculation of Density, concentration and fiber dry weight using the Online moisture meter.
-Development of preventive and predictive maintenance, PM record and generation of reports.
-Head Electrical and instrumentation department.
-Shoulder responsibility of Control system PLC n HMI, troubleshooting, maintenance, modification & up-gradation.
-Preventive and Breakdown maintenance and continuous improvement activities for Electrical & Instrumentation.
-Identifying & maintaining critical spare & updating records as per the audit requirements.
-Preventive & Breakdown maintenance of HT/LT Motors up to 1000 KW, ACB/VCB, HT/LT Panels, Switchgears, Hydraulic Valves, Different types of Instruments like Flow Meters, Proximity switches, Displacement Transducers, Isolation Transmitters, Encoder, ZSS, PCS, APFC etc..
-DCS using Data Highway plus protocol. Wonderware Intouch HMI, RSView32 HMI. Solely did project for remote data logging of Network Analyzers through Modbus RTU RS485 communication.
-Installation, maintenance of RTD, thermocouples, Load cells and weigh scale indicators and their interfacing with PLC.
-11KV system safety devices including CDG, Alstom Reverse power relays, ABB 913 Motor Safety Digital Relay. Undervoltage/overvoltage.
-Installation and commissioning of APFC system using Nokian power factor relays.
-Installation of frequency drives for different type of application LS Puma Fuji and Denfoss VF drives. etc.
-HT 11KV XLPE cable laying planning, VCB installation and commisioning.
-Participated in installation & commissioning Woodward Load sharing module EG3200 for Load sharing of K-Electric 11KV with Deutz 1.4MW four gensets.
-Prepare Load Management reports, Engineering Reports, SOP for enhanced troubleshooting.
-Implemented cost reduction methodologies using the effective use of resources and automation.
-Independently head the Electrical & Instrument department.
-As Head of Engineering Department, directly responsible to manage, supervise and lead the Engineering team
Technical training to newly hired service engineers and managing their training schedule and courses.
Supervision of all zones engineers for technical support.
Spare parts inventory list handling.
Plan the quarterly schedule of quality controls for each zone and coordinating respective
Competitors product evaluation to Make comparison statements to assist the marketing team.
-Participation in Health Sector (Hospitals, Medical institutes) tenders for technical queries satisfaction.
Hands on experience of installation, troubleshooting, repairing, maintenance and calibration of
Hematology Analyzers, Chemistry Analyzers, Electrolyte Analyzers, Microplate Readers,
Microplate Washers, Coagulation Analyzers.
Software installation, firmware upgradation. ReCalibration and factor correction
factor adjustment and quality control for mentioned instruments.
Experienced in pathology chemistry testing including Kinetic, End-point, two-point kinetic, ELISA.
Customer Relationship handling, arranging online backup and support to avoid customer revenue loss.
Inspection of new instruments and pre-testing for QC purpose.
To plan Quarterly service of installed instruments for each territory and assigning the task to zonal engineer.
-Sale and Service of Biomedical instruments including haematology Analyzers, Chemistry Analyzers, Microplate readers, Electrolyte Analyzers.
-Strategy planning to achieve Sales targets..
-Daily Visit report of market and Customer visit log reports.
-Aftersale Service support to customers for handling & operation of instrument as per SOP.
-Calibration and configuration of Hematology, Chemistry Analyzer, Microplate reader.
-Repairing of bio-medical instruments and to resolve the end customer complaints.
Complaint management through CMS & Seibel/CRM.
Configuration of Broadband and DSL Router & Switches.
Troubleshooting of LAN/Internet Connectivity and ADSL.
Configuration of Evo (evdo technology) Wireless & Wifi Cloud.
Configuration of Evo Tab & VAIO.
Configuration and installation guide for IPTV including STB
Worked in Land Record & Revenue Office of TMA Tandlianwala.
To keep tracking of all the records of the government assets i.e. lands, maps etc.
Social interaction with the persons to offer them facility to solve their problems.
Assistance in daily office work including reports, letters and correspondence with District Revenue Department.
Dealing with all the issues regarding Land ownership, Land ownership transfer.
I was working in the Engineering Branch: a sub branch of Infrastructure & Services
Branch of TMA Iqbal Town Faisalabad.
Site Survey for the rules and regulations regarding building viz. of plazas, large building
Small Industries Surveys for the quality checking.
To maintain the regulation of street lights of whole city. Their working, repairing,
automatic switching operation.
Installation of new electrical equipment on streets, roads in different areas of city.
Maintenance work at office regarding its own electricity problems if occurred.
To draw maps and design to deploy the new submitted grant for upgradation of the
-Designed the circuit logic and pneumatic system for Sugar-cane Yield Testing machine.
-It comprises of hydraulic press, compressor, Pneumatic Control, User key interface for automatic control.
- For control work, electromagnetic relays, magnetic contactors, solenoid pressure valves, pressure and temperature gauges were used.and acquired good
- learned detailed Operations characteristics of power plant, working of main
components of Combined Cycle Power Plant that includes Introduction and
Familiarization with CCPP, Gas turbine, Compressor, HRSG, Steam Turbine and Balance
-worked in Instrumentation and Control Department, where I learned about Process
Measuring Instruments, Basic Logic of Controllers and Main Control System that are used
in the power plant and there i gain good knowledge of different devices, transducers etc as
well as switches, breakers, CT, PT, Transformers, switchyard, Operation of control
Also worked and got knowledge of RTD, Pressure Sensors, Frequency Inverters,
Thermocouples and Positioners.