خلاصہ

PEC registered engineer having around one year several process industries experienced. Presently working at Amreli steels limited company as a project engineer, where my job responsibility includes look after the currently running project to its final stage. All electrical and electronics works to be done in a given area under my supervision. Cable tray’s laying, cables laying, electrical and electronics panel placing according to given drawing, termination of panels are my responsibilities. Moreover equipment’s assembling, sensors installations, finally testing and commissioning of equipment are laying under my scope.
Previously I worked at an automation company named as “Rays Control Engineering Services” as an Electronics and Instrument Engineer. Where I had engaged in different industrial automation projects. Following are the list of major companies.
1- General tyre and Rubber
We installed SCADA there. Due to that all curing plant was monitored and controlled by SCADA.it was about 30 million rupees project. In that project I installed all kind of field devices like (RTDs, Pressure Transmitters, I to P convertors). Furthermore I also designed panel’s boxes for PLCs and their modules (4AD, 8AD, Mitsubishi PLCs, 4AD-PT). I also did all wiring of panels boxes.
2- Hilal Foods
At hilal we had completed three projects at a time. Where I installed all sensors and actuators.
During my gradation I did work at security 2000 private limited as a security guard. Actually it was part time job. I had done that in order to made university fee. The duration of that job was around 4.5 years

پراجیکٹس

Proportional-Integral-Derivative (PID Controller)
Laser Based Eavesdropping System Funded By National ICT R&D Fund(FYP)

تجربہ

کمپنی کا لوگو
Project Engineer Electrical & Electronics
Amreli Steels Limited
جولائی ۲۰۱۷ - موجودہ | Karachi, Pakistan

Walking hearth reheating furnace is used to reheat the billet so that rolling make conceivable because rolling of billet could possible if and only if the temperature of discharged billet is 1100 to 1250 degree centigrade. Succeeding are the list of jobs, I had administered;
Erection Work
• Did supervise & watch over the fabrication and installation of cable tray support works.
• Did supervise & watch over the laying of different sizes cable tray works.
• Did supervise & watch over the laying of different cables works. (Power cable, control cable and instruments cable).
• Did supervise & watch over the placing and coupling of electrical & electronics panels works. (Switch gear panel, RIO panels, automation panel, Motor Protection Panels, ACDBs, PCCs, UPS and battery banks etc.).
• Did supervise & watch over the terminations of Panels related works (i.e. Loop test, Meager Test, Continuity test etc.)
• Did install burner control units (BCU)
• Did supervise & watch over the electrical & electronics earthing, earthing strips, bus bars works.
• Did supervise & watch over the installing of different types of Junctions boxes works.
• Did installe and calibration of sensors (RTDs, Thermocouples both S and J type, flow transmitters, photocells, light barrier, proximity switch & sensor, differential pressure transmitters, vibration sensor, LVDTs, Pyrometers, flow transmitters, ultrasonic sensors, flame sensors etc.).
• Did install and calibration of actuators (shut of valves, control valves, relays etc.).
• Did termination of instruments, panels and junction boxes.
• Finally entered in a commissioning phase.

کمپنی کا لوگو
Electronics & Instrumentation (E&I)Engineer
Rays Control Engineering Services
فروری ۲۰۱۷ - جولائی ۲۰۱۷ | Karachi, Pakistan

Working at Rays Control Engineering Services as an Electronics & Instrumentation (E&I) Engineer. A well Known “Automated and Control” Solution Provider Company. Since my joining I have worked on different automation and control system projects in Pakistan famous industries.
 Curing Presses Monitoring System (SCADA) at General Tyre & Rubber.
Job Description:
• I have installed 3 wire RTDs for temperature measurement of all presses.
• Installed and setting of Shinko’s temperature controller (PID) for controlling set point of individual presses through current to pressure convertor (I to P Convertor).
• Installed pressure transmitters for measuring the pressure of all presses and header (Main supply) pressure as well.
• Every row had its own PLCs and every row contain 26 presses. All presses are connected with its own PLC through “MOD BUS”.
• Made some simple level program on “GX Work” for PLCs. We have used FX3U Mitsubishi PLCs.
• Designed HMI at initial level using Wincc.
 Automatic Glucose Draining System from Tanks at Hilal Foods Private Limited.
Job Description:
• Installed level sensor for sensing the level of glucose tanks.
• Installed load cells for weighing the weight of certain amount of glucose.
• Installed solenoid valve for open and close the tanks to drain a specific amount of glucose.
• Installed RTDs for sensing the temperature of hot water of glucose tanks.
• Designing weintec HMI.
• Made some program of PLCs.
 Designed Omron HMI for Curing Press at General Tyre & Rubber.
Job Description:
Working of an Omron HMI.

کمپنی کا لوگو
Security Guard
Security 2000 (Pvt.) Ltd
ستمبر ۲۰۱۲ - فروری ۲۰۱۷ | Karachi, Pakistan

An Electronics Engineer could be a Security Guard. Strange!!!
If you think you can\'t, you wont,and if you think you can,you will.Just trust on yourself and keep strong believe in ALLAH you will do anything whatever you want to do.
Basically I have been doing this job as a part time in order to earn sufficient amount of money for university expenses.I have been working at Security 2000 (Pvt.) Ltd as a security guard since 2012,it was that time when i got admission call from PAF-KIET and PAF-KIET confirmed my admission in Electronics Engineering.I am still doing this job as a part time as during my Engineering.Why i chose to join Security 2000 (Pvt.) Ltd as a security guard???Yes Because i wanted to continue my bachelor and i needed an unstoppable source of income that made my bachelor towards completion.My parents could not afford my university fee.But By grace of ALMIGHTY ALLAH and full support of my parents i have completed my bachelor with flying colors.
Every thing is possible.It is something like this if you tired at practice though you tell yourself you are not tired you can push through.But if you tell yourself that you are sick or tired you immediately stop there because your body follow your mind. So it is concluded that at that time if i thought that \"how can i do this job\"surly i could not do this job till now...

کمپنی کا لوگو
Intern-Electronics Engineer
HubStaff
دسمبر ۲۰۱٦ - جنوری ۲۰۱۷ | Karachi, Pakistan

I was MATLAB intern at Hubstaff. Being a MATLAB intern my responsibilities were:
Key Responsibilities:
-Do research about given project that was totally based on MATALB in a given time.
-Gathering all concerning data related to provided project.
-Write a code for project.
-Finally simulate it on MATALB
-In last make a detail report consist of all codes,supporting material,methods and applications.

کمپنی کا لوگو
Intern
Pakistan Council of Scientific and Industrial Research (PCSIR)
مئی ۲۰۱٦ - جون ۲۰۱٦ | Karachi, Pakistan

Being as an Intern. I have done my internship for a month in Applied Physics,Computer and instrumentation Center. I served as a trainee in Pakistan Council of Scientific and Industrial Research (PCSIR) , where I studied about various equipments and tools used for testing,calibration and correcting Industrial equipments. I get familiarize with the working environment of the Pakistan Council of Scientific and Industrial Research (PCSIR) where different industries,universities and laboratories send their equipments for testing and calibration purpose in order to meet ISO standards.During my internship period I also observed that Pakistan Council of Scientific and Industrial Research (PCSIR) Center have different multiple departments and they are conducting researches on different future innovations so that they would be able to introduce latest technology to their people . Pakistan Council of Scientific and Industrial Research (PCSIR) consist of several shops.Instrument Shop and Electrical Shop in electrical department.

.

کمپنی کا لوگو
Intern
Pakistan International Airlines
جون ۲۰۱۵ - جولائی ۲۰۱۵ | Karachi, Pakistan

Worked as a Trainee Engineer. I have done my internship for a month in Maintenance Engineering department I served as a trainee in Pakistan International Airlines, where I studied about various equipment s and tools used for aircraft maintenance, and above all, I get familiarize with the working environment of the Airline Engineering/Maintenance Department. It consist of three shops.
Instrument Shop:Instrument shop belongs to the all air craft sensors, auto pilot section, navigation,safety and comfort section etc.
Electrical Shop: All aircraft power,APU,Batteries are under this shop.
Radio Shop:Radar,navigation,communication are under this shop.

کمپنی کا لوگو
Intern
Pakistan Telecommunication Company Limited (PTCL)
اگست ۲۰۱۴ - اکتوبر ۲۰۱۴ | Karachi, Pakistan

Worked as a Trainee Engineer Internship for more than a month in PAKISTAN TELECOMMUNICATION (PTCL) in Switching, Transmission & Wireless Local Loop (WLL) Departments.
Responsibilities:
 Monitoring Hardware to Phone Switches.
 Knowledge of Tools and Test Equipment.
 Troubleshooting and maintenance of ROUTERS,SWITCHES.
 Installation of Switching, Ethernet Card.
 Documentation on Line Cards, Fast-Ethernet Cards.
 Manage and lead the simplified one source TM network optimization in a manner that will develop skills for proper succession planning.

تعلیم

PAF Karachi Institute of Economics & Technology (PAF-KIET)
بیچلرز, بیچلرز ان سائنس, (B.E) Electronics Engineering‎
Embedded System, Industrial Control and Automation, Signal and Image Processing
CGPA 3.5/4
2016
Other
انٹرمیڈیٹ / اے لیول, فیکلٹی آف سائنس (پری انجینئرنگ), HSSC‎
Mathematics, Chemistry, Mathematical Physics
فی صد 69%
2012

پیشہ ورانہ مہارتیں

متوسط Automation & Robotics
ماہر Conservation Awareness
ابتدائی Digital Image Processing
ابتدائی Embeded Systems
ابتدائی FPGA
متوسط Industrial Control Electronics
ابتدائی Machine Maintainence
متوسط MATLAB Command
متوسط PLC Ladder Logic
ابتدائی Power Electronics And Drives
ماہر Presentation Skill
ماہر Proteus
متوسط Technical Skill

زبانیں

ابتدائی سرائیکی
ابتدائی عربی
ابتدائی پنجابی
متوسط سندھی
ماہر اردو
متوسط انگریزی

Ahsan آپکے جاننے والے

Rimsha Zafar
Fulcrum Pvt Ltd