概要

To gain valuable work experience by utilizing my educational knowledge, analytical skills and technical abilities in a team oriented and highly professional environment.

项目

Overhauling of Vertical LOESHE Coal mill KELLER Gear box
Dismantling and overhauling of Single Stage Hammer Crusher Rotor

工作经历

公司标识
Master Thesis Student
Siemens Turbomachinary AB
Jun 2019 - Oct 2019 | Norrkoping, Sweden

Experimental Investigation for Pressure Losses in Additively Manufactured Mini channels:

Investigating pressure losses and discharge coefficient in rectangular additively manufactured geometries with different length to diameter ratios. Emphasize in performing dimensional analysis, data acquisition and mass flow/pressure/temperature measurements. Predicting the flow behavior from the results keeping in mind the manufacturing technique. Results were analyzed using classical
flow theories to see properties like e.g. vena contracta, pressure recovery, friction losses, choking, transition between laminar to turbulent flow. Basic knowledge in additively manufactured parts and properties of concern e.g.(Surface roughness) were obtained as a part of the work.

公司标识
Project Worker
AGINITY AB
Sep 2018 - Jan 2019 | Norrkoping, Sweden

Modeling and simulating of ORC turbine Stator & Rotor in accordance to the previous work done possibly looking for improvement in the validation study. Modeling profile losses as a function of Stagger Angle, Inlet Angle, Pitch/chord Ratio and outlet Mach number. Conducting parametric study for the geometry .

公司标识
Executive Engineer
Attock Petroleum Limited
Feb 2017 - Sep 2017 | Rawalpindi, Pakistan

1)Making of maintenance plans using FMECA (Failure Mode, Effects, and Criticality Analysis) for Conditional, Preventive and Predictive maintenance to ensuring smooth APL supply chain from terminal & integrity of equipment\'s.
• Preparation of budget & cost estimation for upcoming major modification on terminal.
• Reviewing of drawings for new projects with respect to maintenance.
• Coordination for procurement of spares for different equipment installed at APL terminals as per demand using ERP.
• Root cause analysis for different issues at terminal, suggestion of their solution and further implementation.
• Coordinator for development of CMMS for terminals.
• Preparation of BOQ’s for Rawalpindi Bulk Oil Terminal.
• Coordination regarding terminal maintenance related bidding and contracting process as per company policies and standards.
• Technical evaluation of bids and recommendation for the award of maintained job.
• Coordination with Inspection Section to ensure Quality of jobs includes testing as per standards (ASME, AWS, API, NFPA, & required Specifications etc)..
• Supervise maintenance of existing Bulk Oil Terminals including storage tanks, pumps, control valves, metering system etc.
• Implementation of preventive maintenance system to minimize the idle time of equipment.
• To ensure safety during maintenance activities.

公司标识
Management Trainee Engineer
Askari Cement Limited
Mar 2016 - Feb 2017 | Jehangira, Pakistan

1)Ensuring system conditional monitoring of various rotary and static equipment installed in the area.
2) Undertaking preventive and corrective maintenance measures for smooth operation of all equipment.
3) Planning, scheduling and budgeting of area maintenance activity.
4) Procurement and technical inspection of relevant mechanical spares and to ensure the availability of necessary spares for maintenance.
5) Maintaining logbook of the area on daily basis.
6) Inventory management, requisitioning and indenting of spare parts through ERP software.
7) Ensuring smooth maintenance activities of the area through CMMS (Computerized maintenance management system).
8) Preparing reports and returns.
9) Undertaking maintenance, repair and replacement activities while ensuring minimum possible down time.
10) Interaction with foreign and local consultant.

公司标识
Internee Engineer Maintenance
Askari Cement Limited
Sep 2015 - Mar 2016 | Jehangira, Pakistan

1)Understanding the setup i.e. technical and administrative echelons of factory.
2)Familiarization with the various processes & functions of cement industry i.e. Crushes, Raw Mill, Coal Mill, Kiln and Utility area.
3) Regular checkup of equipment health and reporting procedure.
4) Observing various activities of parts replacement.
5) Report writing about various activities and happenings.
6) Organizing required work force, arranging tools & equipment for repair / maintenance work.
7) Attending the meeting with foreign / local consultant as observer.
8) Undertaking minor repair and maintenance activities.

公司标识
internee Engineer
Fauji Fertilizer Company Limited
Jul 2014 - Aug 2014 | Mirpur Mathelo, Pakistan

learning trouble shooting,inspection and maintenance techniques for various rotary and stationary equipment installed in the plant .

•Repair of high pressure vessels, columns, heat exchangers.

•On-line repairs and box up for leak fixation.

•Welding of materials (steels, high grade alloys and titanium).

•Refractory installation and repair in direct fired equipment (reformers, boilers).

•Relining & maintenance of critical HP urea equipment (Stripper, Reactor).

•Overhauling of gas turbine & steam turbines.

•Overhauling of high speed centrifugal and reciprocating compressors and pumps.

•Rotors replacement, balancing and casing repair.
Tube to Tube sheet Welding

•Acquiring beginners level expertise in inspection using all the modern tools for reliable inspection for Reactors, Columns, Vessels, Exchangers, Boilers, Tanks and critical HP Loop equipment.

公司标识
Internee Engineer
Pakistan Railways Carriage Factory
Jun 2014 - Jul 2014 | Islamabad, Pakistan

Manufacturing process of railways boogies.
➢ Different process involved e.g. folding, holing, rolling, welding, etc in mechanical workshop.
➢ Working Principle of Lathe machine, milling machine, grinding machine etc

学历

Linkoping University
硕士, MSc, ‎
Mechanical Engineering
2020
Air University
学士, , BE (Mechanical Engineering)‎
Mechanical Engineering
2015

技能

中级 Ansys
中级 Auto Desk Software Command
中级 Autodesk Mechanical
中级 AutoDesk Revit
中级 CF Design
中级 Corrective Maintenance
中级 Drafting
中级 Effective Technical Skills
中级 Electrical Working
熟练 Engineering Drawing
中级 Fire Pumps Knowledge
熟练 Fluent in English
中级 ICEM CFD
熟练 Instruments Drawing
中级 Inventory Planning
中级 Machine Designs
中级 Mechanical Engineering
中级 Mechanical Product Designs
中级 Preventive Maintenance
中级 Problem-solving Skills
熟练 Report Writing Skills
中级 Revenue Analysis
中级 Risk Assessment
中级 Sales Skills
中级 Structural Analysis
中级 Structural Engineering
熟练 Student Affairs Managemment

语言

初学者 瑞典语
熟练 乌尔都语
熟练 英语

Muhammad 联系人

Khan Zeb
Technocrats Institute Of Occupational Safety And Health
Muhammad Atif Atif Rooman
Karachi Shipyard And Engineering Works Ltd.
Muhammad Moneeb Butt
DESCOM, HIT