·         Manager all concerned instrumentation work at site and performer responsible for the smooth shift operation.
·          Testing, programming and communications of Siemens PLC, S7-200 and LOGO module.
·         Communication and Simulation on Schneider HMI using Viejo designer V6.1
·         Testing and controlling of IP (current to pressure) convertor, model 8007, 8008 masoneilan.
EXPERIENCE IN INSTRUMENT CELEBRATION
1)      Pressure Transmitter ( ÉCLAIR)
2)      Pressure Switches ( GEORGIAN)
3)      Level Controller ( PROTAIS VIGIL, KUBLER FRANCE )
4)      Different type of Galvanometer  (CHAUVIN ARNOUX, ENERDIS)
5)      Level Sensor and  Flow detector (HOUDEC INNOVATION)
6)      Thermocouple (J, K, and L) and RTD (PT100, PT200 etc.) testing in the lab as well as loop checking from field instrument to the PCP.
7)      Testing and calibration of clogging filters.
8)      Testing Calibration and loop check of control valves (SEITZ, REXROTH) and troubleshooting in case of failure.
9)      Testing and controlling of engine start-up and stop solenoid valve.
10)  Inspection of continuity test, insulation resistance test of different instruments and control cables from field to the marshalling panel through the junction boxes.
11)  Inspection, delivery control and managing of the new arrival of different instrument and materials. 

·         Communication and testing of Moeller Klockner Plc. PS-306 using Sucosoft software.
·         Installation, setting and troubleshooting of various Delta frequencies driver inverters VFD-B, VFD-V etc.
·         Programming and troubleshooting of Hyundai n700e vector inverter.
·         Control Panel designing with Relay logic & digital controllers.
·         Repairing and soldering of the Printed circuit board (P.C.B).
·         Repair and testing of Single phase and three phase Ac induction motors.
·         Wiring Connection of star and delta motor.
·         Work on Troubleshooting and maintenance of Electric Sealing machine and Packing machine.
·         Fault detection in print circuit board (P.C.B) by Overlapping Trace, burnt out component, checking of I’c, Rectifier, Diode, Transistor, Variable resistor Electric Condenser, Potentiometer, Inductor  Capacitor and many more electronics device.
·         Calculate and design of the Circuit Breaker ampere, power voltage, load ampere, size of the cable of electric panel
·         Maintained stock of all control equipment and association circuit instrument for maintenances program.
Supporting operation team on all maintenances related issue

·         Ensure that all installations are carried as per the drawing and specification
·         Work about electrical designing.
·         Performed of Load calculation.
·         Installation and testing of CCTV.
·         Line transmissions from grids to load distribution. 
·         Estimating transformers sizes.
·         Design the Single line drawing of an electrical installation.
·         Estimate the battery backup of the system.
·         Making Engineering calculations in connection with field and office assignments.
·         Making of quantity survey and load calculations for power and lighting systems.
·         Supervise all electrical work at the site as per drawing
·         Co-ordination with other disciplines in various stages to avoid any kind of delay.
·         Attend meeting with the project director and site engineer for a look-ahead plan.
·         Organized and attended site meetings with the service provider regarding their performance and quality of work.

·         Work on Siemens PLC, S7-200 and LOGO.
·         Testing and commination of PLC, S7-200.
·         Ladder logic Programming done on MICROWIN software and used Ladder logic programming, including interrupts, bit logic, timers and counters, move etc.
·         Work with various PLC technologies and developing and updating existing code for the equipment’s
·         Understanding specifications for programming and developing code for them.
·         Designing the PLC panel and HMI (using TD-200).
·         Overview and introduction of PLC, S7-300.
·         Scada introduction and designing.
·         Coordinate the automation process for client with a team of engineers.
·         Providing hands-on support to manufacturing in the assembly, testing and troubleshooting