Crop Picture
NOTE: Do not upload any image that violates our Picture Policy. Doing so will result in the removal of the concerned image without prior notification.
Summary
Meggering of 130MW-CTG 190MW-STG.
Overhauling of 11.5KV Generator Circuit breaker and Isolator GEC-Alsthom.
Time Test and Resistance Test of GEC-Alsthom Circuit Breaker.
Routine Maintenance of GEC-Alsthom Circuit Breaker.
Routine Maintenance and Casual Inspection of 220KV Switch Yard ABB 242-PMRI circuit breaker.
Routine Maintenance of HV 6.3 Vacuum circuit breaker and LV 400 thermal breaker Switch-Gear testing.
Routine Maintenance of Cathodic Protection.
190MVA and 300MVA transformer buchholz relay testing pressure relieve value.
Dielectric strength test of off-line and online tap changer of transformer oil.
Loop (oil winding test) and calibration of transformer.
Differential Protection Relay 87, Under/over voltage 27/59, Generator Protection testing. 10000/5-CT saturation testing using Magnus, polarity and ratio test.
EX-2000 over under excitation (40) testing relay.
PI test of different 6.3KV motors using HV megger.
Transmission line distance Relay (21) testing using Freja.
Involved in Commissioning activities of combined cycle power plant.
Performance monitoring of combined cycle power plant.
Maintenance management software package like MAXIMO.
Maintained records to reflect work accomplished.
Performed general plant maintenance functions as required.
Performed repairs, maintenance and adjustments to electrical systems.
Performed predictive, preventive, corrective maintenance on electrical systems and components
Repaired, and reassembled electrical components auxiliary electrical equipment
Performing the functions of troubleshooting and breakdown/preventive/corrective maintenance for reducing downtime to Minimum.
Conducted investigation on electrical failures and resolved problems.
Projects
Experience
Assistant Manager Electrical Engineer
Handling of New Projects & Renovations. New shop’s designing & complete the shop in provided time frame. Budgeting and Planning of Project from start to end. Vendor dealing to align work with suitable rate negotiation. Completion of tasks within given timeline.
Meetings with Consultant for proper site execution. Site Visit during execution of site works. Quality Checking as per SOP.
Verification of Final Bills as per site. Resolve shop’s complaint’s at regarding lights, WAPDA, Genset’s of different capacity, HVAC, VRF & Air Conditioning system. Installation of new Security Alarm system and install in various shop’s
Manages electrical team and resolve the complainant in entire region. Establishes technical standards in reviews, documentations, and designs.
Electronic Engineer
• 200KVA & 60KVA Perkin diesel Generator routine maintenance and casual inspection. Design new ways to use electrical power to develop or improve products.
• Repair and maintenance of different brands (APC offline & online, Homage, Hexa, Local Made) UPS up to 5KVA.
• Provides electrical engineering recommendations and technical support on electrical engineering reviews, strategic plans, and projects.
• Keeps equipment operational by following manufacturer\'s instructions and established procedures; requesting repair service.
• Contributes to team effort by accomplishing related results as needed.
• Manages unit and development cost estimations and helps determine affordable and reliable material sources.
• Streamlines production while meeting compliance and safety guidelines.
• Establishes technical standards in reviews, documentations, and designs.
• Manages engineering teams and other electrical engineering staff member.
Electrical Engineer
Maintenance department
990MW low BTU gas plant
Network Support Engineer
