خلاصہ

I completed DAE  from Pak Swiss Training Center in 2012. I developed my
engineering skills through academic projects. I also have completed B. Tech Mechanical.
I am looking forward to a positive response from you.

If you have any questions,

please contact me at:
+92 345 6274743

تجربہ

کمپنی کا لوگو
Assistant manager
Dawood Engineering (Pvt.) Ltd.
مئی ۲۰۱۸ - اگست ۲۰۲۰ | Karachi, Pakistan

Responsibility:To assure quality of vendor supply parts according to standards.Responsible of vendor supply within time and as per schedule.To assist vendor for new part development.To keep check and balance as per standard regarding vendor evaluation and all process of  vendor such as Machining, Stamping and Paintetc.To prepare and record check sheets and collective data.To record minutes of meeting.To check the fitment & function of parts during the production and Analyzed faults.  To control defects and raise feed back to concern area of departments and Vendors.To Coordinate with Quality Manager & General Manager as per requirement.

کمپنی کا لوگو
QA/QC Supervisor
EXIDE
اکتوبر ۲۰۱۵ - دسمبر ۲۰۱۷ | Karachi, Pakistan

<p><strong><span lang="EN-GB">The Largest Manufacturers of Lead Acid Electric storage batteries in Pakistan</span></strong></p>
<p><strong><u>Products:</u></strong></p>
<p><strong>AUTOMOTIVE:</strong> Light and Heavy vehicles Batteries, Earth moving equipment and off-the-road vehicles Batteries.</p>
<p><strong>INDUSTRIAL:</strong>Special application Industrial batteries for standby power.</p>
<p><strong>LOCOMOTIVE:</strong> Engine starting and for Train Lightening system batteries.</p>
<p><strong><u><span lang="EN-GB">Responsibility:</span></u></strong><u></u></p>
<p>To supervise Raw Material Inspection such as battery components.</p>
<p>To supervise Manufacturing and Assembling of batteries as per battery Type.</p>
<p>To supervise QC inspectors to follow process inspection guidelines to achive best quality product.</p>
<p>COS Machines parameters checkups  as per standards to avoid any error in quality of daily production.</p>
<p>To supervise standard guidelines of production and inspection on Manual die casting line.</p>
<p>To supervise final inspection line (packing line) as per battery type standard.</p>

کمپنی کا لوگو
QC Inspector
Aisha Steel Mills Limited
اپریل ۲۰۱۴ - اکتوبر ۲۰۱۵ | Karachi, Pakistan

Inspector QA/AC
AISHA STEEL MILLS LIMITED ( A JOINT VENTURE MITSUBISHI JAPAN)
16th April 2014 – 17th October 2015
Key Skills:
Documentation, Reporting, Instruments calibration, Inspection, NDT (DPI / UT “WM2”), Testing machine (Scleroscope, & Leeb Hardness tester) & CNC Grinding machine operations.

 To Carry out visual inspection at following Stations according to JIS:
 Push Pull Pickling Line.
 Cold Rolling.
 Skin Pass.
 Annealing Furnace Coils.
 Recoiling Line.
 Sheet Cutting Line.
 Electrolytic Cleaning Line.
 Roll Grinding Line. & Shot Blasting unit.
 To enter the inspection data in SAP (Module: Quality Management).
 To feed back to production representatives, whenever a defect is observed.



Personal Development Plan:
o Acquire Training of SAP QM Module.
o Testing machines operations.
o Study of the Production processes, Raw Material /Product Standards.
o TQM / QCDMS / Kaizen.
o Enhancement in knowledge and skills in respect of Statistical Analysis.

کمپنی کا لوگو
Production Officer
DYL Motorcycles
دسمبر ۲۰۱۲ - اپریل ۲۰۱۴ | Karachi, Pakistan

Production Officer
DYL MOTORCYCLES (PVT) LIMITED (FORMERLY DAWOOD YAMAHA)
24th December 2012 – 11th April 2014
 Fitment process control in Hub-4 plants (AEWL, BEWL, DCL, GHL) & Uthal plant.
 Development of new parts in-house & by local, import Vendors.
 Designing of gauges and fixture.
 To record minutes of meeting, process & product audit.
 Vendor assessment for Process Flow of all developing parts.
 To make and verify Samples inspection & pilot lot approvals of vendors.
 Responsible to assure the quality of In-house production and local, import vendor’s supply.
 To inspect and rectify fitment, function and appearance of OEM & local, import components.
 Team assessment for Process Flow of all developing parts.
 To resolve production problems by analyzing data, investigating issues, identifying solutions, recommending action.
 Continuous development and improvement in KAIZEN.
 QCDMS (Quality, Cost, Delivery, Morale, and Safety) control in process line to achieve daily shift production target.

تعلیم

NED University of Engineering & Technology
بیچلرز, بیچلرز ان ٹیکنالوجی, B.Tech Mechanical‎
Mechanical
فی صد 70%
2014
pakswiss trianing center karachi
ڈپلوما, Dies and Molds‎
Dies and mould (Mechanical)
نامکمل
2012
Ali Children Secondary School
میٹرک / او لیول, سائنس, SSC‎
Biological Sciences
فی صد 83%
2008

پیشہ ورانہ مہارتیں

ایک سال سے کمAutocad
ایک سال سے کمCost Accounting
ایک سال سے کمEco-friendly
ایک سال سے کمEnd-to-End Project Management
ایک سال سے کمOperations Responsibility
ایک سال سے کمQuality Assurance Processess
2 سال SAP
ایک سال سے کمStock Reporting
ایک سال سے کمTime Management
ایک سال سے کمWarehouse Management

زبانیں

ماہر اردو
متوسط انگریزی

آپ کن کمپنیز کی پیروی کر رہے ہیں

مزید دیکھیے