JOD
·          Assisting CRE in Technical Matters.
·          Monitoring andsupervising of all sub-projects and giving technical inputs as and giving whwn required.
·          Identify quality issues,if any and recommend solution to problems encountered during construction.
·          Prepare technical report as and when required relating to specfic field issues / probems
·          Read and understand all quality control requirements for specific task being performed by the construction staff and ensure for compliance with the specification.
·          Review and monitor allquality control activity and testing.
·          Ensure proper testing, verification of results and follow up.
·          Performed fieldvisit for progress and quality assurance purposes.
·          Guide AREs andInspectors on quality assurance issues and proptocols. Attend meetings and assist CRE in different project meetings.
·          Any Task assign by the management.

Designation Resident Engineer, Assistant Resident Engineer

Project Repairing, Renovation and beautification of Hayat Abad Medical Complex Peshawar , FATA
Water Resources Development

Organization AGES & AFKAR Association Consultant. AGES and BAK Association Consultant
Client Ministry of Health. FATA Secretariat (Asian Development Bank)


Duties and Responsibilities:
Supervising an Engineering team (Architectural, Civil, Electrical, and Mechanical) for Different Wards, OPDs, O.T and Weirs Construction). Preparing & reviewing reports, IPCs, Time extensions and presenting the company in all Meetings like progress and tendering with client etc.

Project title: KAP-4 (Dormitories and Border Guards), Riyadh K.S.A.
Project cost: 800 Million, Saudi Riyals.
Structures: Buildings and Internal Roads

Reviewing technical and material submittals, shop drawings, method statements, as-built drawings related to structural/civil discipline and prequalification documents of subcontractors, manufacturers and testing agencies.
Leading a team of structural inspectors and land surveyors for carrying out inspections. Performing joint inspections with structural inspector and QA/QC Engineer for major activities and remedial works.
Coordinating between different trades in reviewing coordination and builder works drawings.
Reviewing and signing off the IR’s and MIR’s.
Reviewing mix designs for selection of mixes of different grades.
Providing suggestions to senior staff members (i.e. AM) for resolution of constraints and potential delay factors.
Studying field sketches and calculations to approve minor changes as per the site requirements.
Reviewing test procedures and witnessing necessary tests performed on site and off site and also reviewing formally submitted test reports.
Attending technical meetings for structural quality assurance.
Resolving various technical, contractual, design and general issues on day to day basis.
QA/QC inspections/visits on site and assisting QA/QC department in issuing site observation notices (SONs) and nonconformance reports (NCRs). Preparing weekly and monthly reports. Providing information to planning engineer about completed and ongoing structural works to ensure the progress of project as per program.
Supporting quantity surveyor in review of interim payment certificate and deciding approval / disapproval of the claims submitted by contractor.
Ensuring site safety by applying the standard safety procedures.
Maintaining all requisite documents, approvals and keeping the system updated. ,

Project title: ITCC phase –II Riyadh K.S.A.
Project cost: 2.31 billion, Saudi Riyals.
Structures: Buildings and Internal Roads

Position Role & Responsibilities:

Supervising an Engineering team and preparing work plan for different work phases.
Co ordination with consultant for shop drawing and material approval.
Coordination for change orders and site issue with consultant and contractors.
Plan, direct co-ordinate, and control the work.
Execute Project in accordance with corporate practices and Project procedures
Developing and implementing a project execution plan that meets with Company and Contract requirements
Provide leadership and commitment to the Project HSE and Quality plan.
To focus upon customer care and customer feedback
To understand the Project ‘business case’ and drivers
Act as focal point for Engineering, Procurement, and services resources deployed on the project
Interface closely with client management representatives to ensure client interests are being accommodated
Clearly define and communicate the project objectives and organization to the Project team
To feedback to the Company data related to performance of work on a regular basis.
Estimate to prepare change orders / Extra works.
Progress monitoring and prepare invoicing to follow the bill of quantities.
Analyze and prepare Subcontract documentation.
Coordinate and participate in Suppliers negotiations.
Planning and material management for construction work and Material take-Off for procurement.
Estimation and Verification of Variation/Change Orders.
To document lessons learned and to review/implement lessons learned from other Projects

Owner: Ministory of Interior.
Contractor: Saudi Bin Ladin Group.
Project title: M.O.I integrated projects KAP-0.
Project cost: 250 Millions, Saudi Riyals.
Structures: Buildings, internal roads, water tanks, septic tanks, swimming pool, manholes, Fuel tank with petrol pump, gasoline tank for chiller supply, low pressure gas Tanks (LPG tanks), basketball and football playground, fence and walkways.

Position Role & Responsibilities:

Encouraging continuous improvement through the measurement and reporting of the
Key operational aspects to senior manager.
Providing specialist direction on unusual or difficult engineering issues.
Liaising with client representatives, other professionals within design teams and Contractors’ representatives during construction.
Carrying out site visits and surveys.
Monitoring and inspecting the work of contractors and other third parties.
Monitoring environmental protection measures & reporting of any hazards/incidents.
Ensuring that all engineering activities are correctly casted and the complete design is delivered to the agreed budget.
Inspection of various activities(reinforcement, formwork, field density test, water proofing membrane, Protection sheet, Anti-termite, polyethylene sheet, concrete pouring, cylinder crushing result, concrete Pouring Sheet, concrete crushing Worksheet, boulders, drainage filter material, geo textile, sub-base, base Course below asphalt, mc1, asphalts, material Delivery inspection at site according to specifications and Approved Materials, Check as built drawings and invoices on %age basis etc) at site and maintain quality of work as per R.F.I and issuing of NCR and site instructions if needed.
Monitoring weekly crushing results, work progress reports and keep records of RFI, MIR, NCR, site Instructions and site Clarifications, filing the RFI, MIR, minutes of meeting, approved materials list, site Clarification and FDT results etc.

Organization Al-Herby and ARABIAN MCROMAN Est. Riyadh K.S.A
Client: MOT (Ministry of Tranportation)
Consultant Saud Consultant and Engineering
Structures Roads, Bridges and Culverts.

Duties and Responsibilities:

Supervision of Major Structures, Bridges and Roads .Scheduling, Resource Planning, Estimation, and Bill Processing. Having requisite experience on Quality/Material aspects of Roads Highways and Structural Engineering as per International standards and codes. Monitoring of PCC, RCC, Pre-stressed concrete works As per Technical specification.
Review shop drawings for structural adequacy to ensure that shop drawings are prepared as per design Drawings, international codes and specifications.
Supervised the construction of Major Bridges ,
Camel Crossing, Culverts.
Responsible for construction activities regarding structures such as making & checking
Of bar bending Schedule, concreting work.
Testing and evaluation of mix designs to ensure Quality Assurance, Studying Contractors
Programs for Construction, guide and check reinforcement rectify any apparent mistake
in respect of contractor and project.
Setting up quantity and quality control procedures and review of contractor method of
Statement of construction, check laying, compaction of concrete including curing operations.
Attend project meetings to clarify structural and construction issues for smooth working.
As a Bridge Engineer- Field I was also responsible for assisting the Structural Engineer,
Resident Engineer and Construction Manager in overall project activities related to
Minor and major Structures trough daily reports.
Developed appropriate project management technique for the timely completion of the project. Operation management of manpower, Material and equipment and monitoring & Planning of alternatives for maximum utilization.
Ensure safety of road users, maintaining detours as per design during project to avoid accidents.

Project Nofa Equestrian Resort, Roads and Culverts
Value 150 Million S.R

Duties and Responsibilities:
Supervising infrastructure like Road construction (Supervising center line fixing, sub grading (95 % compaction), Sub-base (100 % compaction) MC1 (.75--1.5 liters / Sq. meter, asphaltic base coarse 8 cm thick & wearing coarse 5 cm thick), Curb Stone installation, Drainage construction, Paddock construction (fences, sub-base, cushion fine sand), Swale construction, Thurst Block, Different types of trenches.
Ensure procurement of construction materials as per client approved list of material and
Stockpiling / storage as per Client specification.
Maintain record of material in & out of site.
Recommends or confirms design change, material source and equipment substitutes,
And assures that costs do not exceed appropriate funds by anticipating overruns. .
Inspects safety requirements for the workmen/ project and prepare safety reports on weekly basis.
Analyze geological report of the site/ nature of the soil to the actual site condition and endorse
or alter the design as per actual site stratum condition.( Bearing Capacity).
Solve on-site design related problems within client’s requirements.
Strictly monitor the quality control requirements for Concrete, Soil, Asphalt,
And construction procedure as per specification. Testing of these materials as per AASHTO/ASTM.
Supervise and monitor construction progress on daily, weekly and monthly basis.
Prepare progress reports on weekly and monthly basis.
Planning and scheduling of project works on weekly basis to attain the optimum results.
Construction of Over Wadi (OW) Bridges, box and pipe culverts required for drainage and flash flood as per designed drawings and specifications.
Views problems in a positive way and proposes solutions to streamline operations and
Improve working conditions.

Project 132 and 33 kv transformer rooms, water tank & oil pit (SCEco. Project).
Villas, Apartments and Meteorological building (Aramco. Project)
Structures Buildings, internal roads& External works like drainage, sewerage system (Manholes, Septic tank & cesspool), Retaining wall, and fencing for observatory area, Walk way, water tank & pump room.

Position Role & Responsibilities:

Ø Monitoring and inspection of all aspects of construction activities with respect to the contractors performance of the works in compliance with drawings, specifications and approved quality control program.
Ø Controlling in-house and subcontract civil and structural works, monitoring and inspection of all aspects of construction activities, witnessing operation and reporting.
Ø Vigilant on all construction activities, attending inspections, signing off works, witnessing operations and reporting.
Ø Systematic recording of data on tests and inspection carried out.
Ø Identification, assessment and reporting of irregularities, verification of corrective measures.
Ø Records, issue site instruction and non-conformances observed during operation.
Ø Maintain records and personal notes for ready reference when contractual issues arose.
Ø Review specification and drawings, vendor submittals to become familiar with the scope and details and check interfaces of other contracts.
Ø Promoting quality achievement and performance improvement throughout the organization.
Ø Maintaining awareness of the business context and company profitability, including budgetary control issues.
Ø Working with purchasing staff to establish quality requirements from external suppliers.
Ø Ensuring compliance with the national and international standards and legislation, and considering the application of environmental health and safety standard.
Ø Setting up and maintaining controls and documentation procedures.
Ø Ensuring tests and

Site Engineer
Golra Builders
Pakistan
Organization Golra Builders, Hayat Abad Peshawar Pakistan.
Designation Site Engineer
Project Commercial Plaza at phase-3 phase-4 Hayat Abad, Peshawar, Pakistan.

Duties and Responsibilities:
Site supervision, monitoring project progress, Bar bending scheduling, Take off materials and check the materials quality as per specification, change in design as per site condition & managing other site problems.
Preparation of weekly and monthly progress reports for onward submission to the Structural Engineer and Construction Manager.
Preparation of safety schemes at work site and coordinating with safety manager for ensuring safety procedure to avoid fatal accidents.
Preparation of preliminary documentation regarding work execution and progress monitoring in conformity to the project schedule.
Preparation of Quality Control documents and coordinating with Quality Control Manager for ensuring the works to be carried as per designed drawings and contractual specifications.
Co-ordinating with local authorities and people to solve the obstacles related to the projects.