概要

06 years Including UAE and Pakistan, Professional working Experience in ,Production Quality, Maintenance and Projects as an Engineer.
On hand experience of Inspection, Fabrication, Welding, Testing, Production and Documentation
Strong Internationally Technical experience in Projects, Planning and Execution, coordination, Performing Test/ Inspections activities as per international standard and codes, specifications.
Preparation and Implementation of Technical Reports SOPs/ Documentation also Manuals and procedures.
Professional knowledge of MS Office, Working experience of SAP on Purchasing Module.
Good Practical knowledge of Machines Building and their Repairing.
Identifying Quality and Maintenance problems and Finding Root Cause Investigation.

工作经历

公司标识
QA/QC and Production Planning Engineer
Elite Engineering (Pvt.) Ltd
Jul 2018 - 代表 | Lahore, Pakistan

·         Perform all daily inspection and test of the scope and character necessary to achieve the quality construction required in the drawing and specification for all works under the contract perform ON or Offsite.·         Carry out inspection and checking for all quality related procedures in the workshop and ensure activity at workshop as per approved methods statements and inspection test plan.·         Coordinates with the consultant’s representative and site In-charge for inspection and meeting about quality problems including closure of non-compliance report. Oversee operational cost, risk and audit activities.·         Taking care of QA/QC document of the entire projects including certificates, calibration, test results, inspection request, non-compliance reports, and site instruction/observation and other QA/QC documents.·         Responsible in the quality and workmanship of every activity, through knowledge of all the phases of engineering construction relating to Mechanical, Architectural & Structural discipline interfacing the multi-discipline operation.·         Develop methods statements for the activity including risk managements, and job safety environment analysis and inspection test plan and checklist based on specification of the project.·         Carry out internal audits at workshop as scheduled in the projects Quality plan.·         Technical knowledge and working experience of GATE VALVE, GLOBE VALVE, CHECK VALVE (NRV), STAINERS, BALL VALVES, and PRESSURE SAFETY VALVES.·         Technical Knowledge of Piping standards, Flanges,Fittings,PVC Material,Tanks,Pressure Vessels, Steel structure AWS D1.1. ·         Technical knowledge of Fire Fighting equipment’s such as FIRE GUNS, FIRE HYDRANT, FIRE BLANKETS, FIRE EXTINGUISHERS, FOAM INDUCTORS ETC.·         Material inspection and coordinating with supply chain department regarding material schedule and inspection of material at site as well as in local Market.·         Preparation of Qualit

公司标识
QA/QC and Production Planning Engineer
EPIC Pvt Ltd.
Jun 2017 - Jun 2018 | Karachi, Pakistan

·         Responsible for all QA/QC Activities. Review Scope of work, Drawings, MTC, QIP, WPS, PQR, WQT, Hydro testing, Pneumatic testing, Stage wise inspections as per Quality Plan & procedures and Documentation.·         Receiving, dispatching and filing of all technical documents.·         Maintain and control of documents as per ISO standard and Quality Plan.·         Preparation and Maintain the log showing of Technical documentation, procedures, Reports and Non- Conformance Notification, Safety Violations, General Site Advise, and Site Instruction.·         Effective Communication with Client, Subcontractors and All other interrelated departments.    Projects Done:Supply shop Fabrication of De-dusting Pipes, Chutes and Expansion Joints for Material Transport (DG Cement Company Hub Gadani Karachi (Client LOESCHE GmbH Germany)Project Include:·         Design and Fabrication of De-dusting Pipes, Chutes, Hoppers, Steel Structure and Expansion Joints for Material Transport. Sand Blasting and painting of Material also include. Supply Fabrication of M.S. Vessels and Storage Tanks for Extension of Indigo Dyes Project (Archroma Pakistan Pvt Ltd)Project Include:·         Design, Fabrication and Erection of M.S. Pressure Vessels designed on ASME standard capacity up to 25M³.·         Design, Fabrication and Erection of Storage Tanks designed on API 650 Standard capacity up to 150M³. Shah Murad Sugar Mill (Ethanol Distillery Capacity 125,0000 liter/day.)Project Include:·         Design, Fabrication and Erection of Re-Boiler and Condensers, Distillation Columns, Condensate Tanks and Decanter, Molasses Storage Tanks, Mother Yeast and Fermenter Tanks inSS-304L & SS-316LMaterials.Kompass Pakistan Pvt Ltd (Supply and Erection of Pre-Fabricated Tower Steel Structure)Project Include:·         Design, Fabrication and Erection of Steel Structure (Columns, Beams Stairs, Hand Rail, Platform, chequered Plates and Grating),Sand blasting and painting of Structure.Cherat Packagi

公司标识
Project Engineer:
Avenir Technologies FZE
Mar 2016 - May 2017 , United Arab Emirates

·         Monitor compliance to applicable codes, practices, Project Requirements , performance standards and specifications·         Determines project responsibilities by identifying project phases and elements. Assigning personnel to phases.·         Confirms product performance by designing and conducting tests.·         Project Planning, Scheduling, and Execution, with the Coordinate of Management for assigned projects.·         Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.·         Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.·         Determines project schedule by studying project plan and specifications.·         Maintains project schedule by monitoring project progress.·         Statistical Process Control Tools and Implementation, Lean Manufacturing Techniques, Team Building.·         Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.·         Maintains QHSE procedures, rules, and regulations.                                                                                                 

公司标识
QA/QC and Production Planning Engineer
RAVI AUTOS SKP (PVT.) LTD
Jun 2014 - Feb 2016 | Lahore, Pakistan

Ravi Auto Pvt. Ltd,are the leading vendors of Pak Suzuki, Millet Tractors and Atlas Honda.          The job description includes:·         PRODUCTIONS: Statistical Process Control Tools and Implementation, Lean Manufacturing Techniques, Team Building and Managing for Operations, TQM Concepts Application, Innovation for Productivity Improvement Without Disturbing Quality. Use different Fabrications Techniques.·         PRICING/COSTING, PROJECT FEASIBILTY STUDY: Preparation of Quotations Along with All Supporting Documents required by different Customers. Control the Pricing during Fabrication and completion of the project.·         Project planning and execution and developing Manufacturing & Inspection Plan·         Scheduled Maintenance: Preventive Maintenance, Predictive Maintenance & Time-Based Maintenance.·         Production Planning to increase productivity and Cost Reduction·         Provide engineering support for production and maintenance activities to ensure maximum production.·         Leading and supervising installation and commissioning of new Manufacturing Equipment and HVAC systems. Installation & maintenance of pumps, motors, filters, chillers, compressors &ducts.·         Prepare SOP, work instructions, process flowchart and inspection standards for new developed products.·         FMEA Analysis (Failure Mode & Effect Analysis).·         Supervise development operations and Heat Treatment (Annealing, Hard &Temper, Normalizing and carburizing).·         Die designing, steel grades chemical composition, spectroscopic analysis, tolerance, fixtures, Gauges.·         Cost analysis and Budgeting of new manufacture parts. Projects Done:·         Ring Gear 68 Teeth, Ring Gear 54 Teeth, Ring Gear Flywheel St-308, Crank Shaft Motorcycle 78CC, Ring Gear 44 Teeth, Forging Center End, Hub Lubricant oil pump, Nissan Hub Nut and Bolts, Counter shaft Fiat, Weight Balancer, Balancer Gear, Balancer Shaft, Inner Thread, PTO shaft, water pump

学历

Superior University Lahore
硕士, 科学硕士学位, Engineering Management‎
Project Planning, Operation Management, Human Resource Management
CGPA 3.5/4
2020
University of Lahore
学士, 理工学士, Mechanical Engineer‎
Autocad, Engineering Mechanics, Thermodynamics
CGPA 3.28/4
2014

技能

熟练 QA/QC
熟练 Ability to work in a team
熟练 Analytical Reasoning
熟练 Analytical Skills
熟练 B2B Marketing
熟练 Behavior Change Communication
中级 Bid
熟练 Bid Response
熟练 Business Development Process
熟练 Business Development Strategies
熟练 Channel Sales Development
熟练 Communiction Skills
熟练 Convincing Power
熟练 Costing
熟练 Costing Methodology
熟练 Data Analysis
熟练 Decision Making Skills
熟练 Digital Business Development
熟练 Engineering
中级 Estimation Preparation
熟练 Experienced in Construction
熟练 Fabrication and welding
熟练 Fluent in English Urdu
熟练 Food Knowledge
熟练 Foundry Machine Shop Procedure
熟练 Knowledge Of Metallurgical Materials
熟练 Lab Knowldge
熟练 Mechanical Skills
熟练 Merchandise Development
熟练 Negotiation Skills
熟练 Official Assignments
熟练 Outstanding analytical and problem-solving skills
熟练 Planning
熟练 Planning Consultancy
熟练 Product and Process Knowledge
熟练 Production and planning
熟练 Production Coordination
熟练 Production Management
熟练 Production Managers
熟练 Production Planning
熟练 Project Co-Ordination
熟练 Project Management
熟练 Project Planning
中级 Proposals
中级 SAP
熟练 Shop Operations
熟练 Strong Knowledge Of Production Process
熟练 Team Building
熟练 Team Co-ordination
熟练 Team Effectiveness

语言

初学者 阿拉伯语
熟练 乌尔都语
熟练 英语