• Making BOQ for the each bridge to be fabricated.
• Testing of steel to be used in bridge fabrication from the Karachi Shipyard Engineering Laboratories and interpreting results according to design and ASTM standards
• Monitoring the fabrication of the bridges at each stage.
• Guiding to the supervisors and workers according to design codes and ASTM standards.
• Erection of the bridges at site i.e. Sibi-Harnai (Baluchistan).

• Supervision and assistance for the body fabrication of Hino Duetro trucks.
• Supervision and provide technical knowledge for the body installation of air force Hilux escort mobiles.
• Design and technical assistance for the customized Body fabrication of different sizes.
• Assembling and disassembling of body from ISUZU and Hino trucks as well as ravi and other vehicles.
• ICI paint of different colors as per demand of costumers.
• To estimate total cost and time required for completion of the vehicle.
• To prepare Bill of Material (BOM) & Bill of Quantity (BOQ).
• To supervise & manage workers according to job.
• To estimate man hour and break down work schedule .
• Preparing work order, making priority list as per payment and delivery schedule.
• Managing quality of work according to required standards

• Supervision of flow line of the 6” and 4” from wellhead 8 wellhead to gas gathering station at TandoAllahyar.
• Supervision of 12” Trunk line from Gas Gathering Station to Gas Processing Plant (Kunner OGDCL).
• Monitoring the sand blasting, sleeving and lowering of the pipes.
• Dealing with unplanned interruption in daily work.
• Monitoring the fabrication of wellhead piping and Mechanical structure.
• Managing and supervising the Erection of15 Wellheads.
• Supervising of piping of Gas Processing Plant (Kunner OGDCL).
• Guidance and assistance to the technical staff for any sudden change in planned work/procedure.
• Ensuring compliance with health and safety.
• Preparation and approval of QA/QC procedures of non-destructive techniques like Visual Inspectionand Radiographic test (RT).
• Coordinating with third party inspectors and client.
• Material inspection, visual, dimension, verification of correctness, identification and correlation with manufactures test certificates.
• To visit the construction site daily to check whether all works, materials, equipment’s are in accordance with Project drawing & specification.
• Performed inspection proceduresDuringevery stage of welding.
• Weekly project meeting and report to the QA/QC Manager.
• Making the NDT request for welded joints.
• Review of radiographic films and analyzing the results.
• Verifying the adequacy of the Quality Control procedure. Checking that inspections and test are carried out and documented in accordance with the approved procedure (Especially API 1104, ASME sec IX and ASME B31.3) and quality plans.
• Documentation/filling of all inspections records.